#include<SoftwareSerial.h>
const int rx=1;
const int tx=2;
SoftwareSerial Serial(rx,tx);
int AnalogValue=0;
int DigiValue=0;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  pinMode(tx, OUTPUT);
  pinMode(4, INPUT);
  pinMode(0, INPUT);
  //digitalWrite(1,LOW);
}

void loop() {
  // put your main code here, to run repeatedly:
  AnalogValue= analogRead(A2);
  DigiValue= digitalRead(0);
  Serial.print("AnalogRead: ");
  Serial.println(AnalogValue);
  Serial.print("DigitalRead: ");
  Serial.println(DigiValue);
  delay(1000);
}